Preliminary Work

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Remove hydraulic unit.
> 453019 - REMOVING AND INSTALLING HYDRAULIC UNIT - SECTION ON "REMOVING"
Convert holder -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Holder for hydraulic unit
1. 2.1 Unscrew screws -2- and remove holder -1- from hydraulic unit.
2. 2.2 Fit holder -1- on new hydraulic unit.
3. 2.3 Fit and tighten screws -2- .
  >
Install new hydraulic unit.
> 453019 - REMOVING AND INSTALLING HYDRAULIC UNIT - SECTION ON "INSTALLING"