Installing Cowl Panel Cover

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Install cowl panel cover -3-.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Cowl panel cover
1. 1.1 Clean channel on retaining strip -4- .
2. 1.2 Insert cowl panel cover -3- into the retaining strip -4- and align it.
3. 1.3 Engage cowl panel cover -3- in retaining strip -4- .
Clip in plenum panel cover and check that the rubber profile is seated correctly.