LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan T >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (50 - Body Front) >> WM, 50795505 Replacing Front Longitudinal Member (Front Cut) >> Preparing Connection Areas Of The Body For Installing Front Side Member (Front Cut) >> Preparing connection areas of the body for installing front longitudinal member (front section)

Preparing connection areas of the body for installing front longitudinal member (front section)

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align contact surface and connections of the body.
  2. De-burr connection points and prepare them for applying a full steel weld.
  3. Prepare marked areas for applying a full steel weld.
    G14360951Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Connection areas

  4. Fit in new front longitudinal member (front section) and secure it.
scientia non olet · About LEMON Manuals