LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan T >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (50 - Body Front) >> WM, 50795505 Replacing Front Longitudinal Member (Front Cut) >> Installing Front Longitudinal Member (Front Cut) >> Installing front longitudinal member (front section)

Installing front longitudinal member (front section)

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install front longitudinal member (front section) and check that it fits perfectly. Check gap dimensions.

    > 5X00IN GAP DIMENSIONS

  2. Apply a full weld to area -LHD vehicle -  and -RHD vehicle -  using inert gas.
    G14360952Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Welded seams

scientia non olet · About LEMON Manuals