Preparing Headlight Mounting For Installation

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Cut off tab at the bottom of the new part -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Tab
Fit in support and secure it to the body.
Drill holes for blind rivets using > Diameter 6.6 mm .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Holes
Remove support.
Prepare connection areas for welding.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Preparing for welding

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Preparing for welding

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Preparing for welding

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Preparing for welding

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Preparing for welding
Prepare connection areas for bonding.
> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Preparing for bonding

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Preparing for bonding