LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan T >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (50 - Body Front) >> WM, 503819 Removing And Installing Upper Part Of Lock Carrier >> Removing Upper Part Of Lock Carrier

Removing Upper Part Of Lock Carrier

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen operating cable for bonnet release -2-  .
    G14360557Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Operating cable for bonnet release

    1. 1.1  Open cover -1-  .
    2. 1.2  Unclip operating cable for bonnet release -2-  from the bracket and disconnect it.
  2. Actuate release -Arrow-  and pull out stopper -1- (-Arrow-). 
    G14360558Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Plug

  3. Unclip electric wire harness -3-  at upper part of lock carrier -2-  .
    G14360559Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Electric wire harness

  4. Unscrew and remove screws -1 to 3-. 
    G14360560Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Upper part of lock carrier

  5. Pull upper air guide -1-  out of the retaining lugs -2-  .
    G14360561Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Upper air guide

  6. Push upper part of lock carrier forward, guide the guide out of the radiator and remove it.
scientia non olet · About LEMON Manuals