LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan T >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (50 - Body Front) >> WM, 503819 Removing And Installing Upper Part Of Lock Carrier >> Installing Upper Part Of Lock Carrier

Installing Upper Part Of Lock Carrier

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tighten screws on lock carrier side section to > Tightening torque 9.7 (7.5 ftlb.) Nm  .

    Tighten screws on transverse strut to > Tightening torque 9.7 (7.5 ftlb.) Nm  .

    Tighten screws on radiator assembly to > Tightening torque 9.7 (7.5 ftlb.) Nm  .

scientia non olet · About LEMON Manuals