Removing Pressure Accumulator

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information

The cutting ring -1- and Voss threaded joint -2- must remain on the air line -3- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Air line

CAUTION: Escaping residual air

Risk of eye injuries
→ Wear protective goggles.

Loosen pressure accumulator -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for pressure accumulator
1. 1.1 Unclip electric wiring harness -2- from clips -3- and move it aside.
2. 1.2 Unscrew air line -4- and move it aside.
3. 1.3 Unscrew nut -5- .
Remove pressure accumulator -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Pressure accumulator
1. 2.1 Pull pressure accumulator -1- in -direction of arrow A- off retaining pins -2- .
2. 2.2 Pull pressure accumulator -1- in -direction of arrow B- off retaining pins -3- and remove it.