Installing Rear Level Sensor

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Install new rear level sensor -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Level sensor
1. 1.1 Position rear level sensor -1- .
2. 1.2 Screw in and tighten new screw on the rear axle housing -4- with a new nut.
  > Initial tightening 70 Nm
  
  > Final tightening + 180°
3. 1.3 Screw in and tighten screw on the trailing arm -3- .
  > Tightening torque 9 Nm
4. 1.4 Connect and lock electric plug connection -2- .