Removing Front Level Sensor

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information

Either two or four level sensors are installed on the vehicle, depending on equipment variant:

Steel springs without PASM: only left side of the vehicle (front and rear axle)
Air springs and steel springs with PASM: left and right side of the vehicle (front and rear axle)

Disconnect electric line from front level sensor.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Electric plug connection for front level sensor
1. 1.1 Release and disconnect electric plug connection -1- .
2. 1.2 Unclip clip -2- .
Remove front level sensor -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Front level sensor
1. 2.1 Unscrew nut -2- .
2. 2.2 Unscrew nut -3- and remove front level sensor -1- .