LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan T >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (43 Leveling System, Air Suspension, Damper Control 3.0L -- 95B - MACAN (95B)) >> WM, 431619 Removing And Installing Control Unit For Chassis Control >> Installing Control Unit For Chassis Control

Installing Control Unit For Chassis Control

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tighten fastening nuts on control unit for chassis control to > Tightening - torque 4.3 Nm (3.2 ftlb.)  .

scientia non olet · About LEMON Manuals