Releasing Air From Air Suspension System
WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the PIWIS Tester to the vehicle and start it. Switch on ignition.
- Start the diagnostic software.
- Select Levelling system/PASM control unit.
- Select the Maintenance/repairs tab.
- Press F12 to select Bleeding the entire air spring system .
- Follow the instructions on the Tester.