Filling Air In One Air Spring
WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
Preconditions for filling an air spring/the air spring system
- Vehicle raised on a lifting platform, wheels freely suspended.
- All components of the system installed and connected.
- Connect the PIWIS Tester to the vehicle and start it. Switch on ignition.
- Start the diagnostic software.
- Select Level control/PASM control unit.
- Select Maintenance/repairs .
- Press F12 to select Replacement of an air spring .
- Select Filling an air spring from the pressure accumulator function.
- Follow the instructions on the Tester.
- Erase fault memory with F8.