Resetting Transfer Gear Wear Integrator
WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the Tester to the vehicle and start it. Switch on ignition.
- Select the vehicle type if required.
- Select the All-wheel menu.
- Maintenance/repairs must now be selected.
- Transfer gear - oil change must be selected. Press F12 to continue.
- Perform procedure according to menu guidance. Read and follow the instructions and information on the Tester.