Subsequent Work

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Install transmission support -9- .
1. 1.1 Fit transmission support -9- .
2. 1.2 Fit and tighten nuts -1- and screws -2- .
  Nuts -1- > Tightening - torque 20 Nm (15 ftlb.)
  
  Screws -2- > Tightening - torque 70 Nm (52 ftlb.)
3. 1.3 Lower > VAS 6931 - engine and gearbox jack and remove it from the work area.
  
  Fig 1: Transmission Bracket Component Location
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  
  Transmission bracket
Install centre underbody cover.
> WM, 519319 REMOVING AND INSTALLING COVER FOR CENTRE UNDERBODY