Removing Sealing Ring For Front Left Halfshaft Flange

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Remove cover for final drive.
1. 1.1 Unscrew screws -10 to 1- .
  1. 1.1.1 Replace screws.
  Fig 1: Final Drive Cover Screws Loosening Sequence
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  
  Cover for final drive
2. 1.2 Carefully take off the cover.
  1. 1.2.1 Replace O-ring.
3. 1.3 Collect emerging oil.
Carefully remove differential and set it down on a soft surface.
Press out sealing ring from the back -Arrow- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Sealing ring for front left halfshaft flange
1. 3.1 Clean sealing surfaces.
2. 3.2 Replace sealing ring.