LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan T >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (39 Final Drive Differential, Differential Lock 3.0L -- 95B - MACAN (95B)) >> WM, 392519 Removing And Installing HALFSHAFT Flange >> Removing HALFSHAFT Flange >> Removing Right Halfshaft Flange

Removing Right Halfshaft Flange

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove right halfshaft flange -1-  .
    G15152980Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Halfshaft flange with puller (similar to illustration)

    1. 1.1  > T10037 - Puller-2-  must be positioned on right halfshaft flange Then screw in screws -3-  .
    2. 1.2  Pull off right halfshaft flange -1-  using > T10037 - puller-2-  .
  2. Clean the halfshaft flange and set it down on a clean surface.
  3. Replace circlip -1-  .
    G15152981Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. 3.1  Clamp the halfshaft flange -2-  in a vice with protective jaws.
    2. 3.2  Remove the circlip -1-  and fit a new  circlip
scientia non olet · About LEMON Manuals