Installing Sealing Ring For Halfshaft Flange (Rear Final Drive]

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information

The procedure for removing and installing is described for one side as an example. The procedure for the other side is almost identical.

Install new sealing ring for halfshaft flange.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Sealing ring and pressure pieces
1. 1.1 Clean the sealing surface of the sealing ring.
2. 1.2 Oil the outer edges of the halfshaft-flange sealing ring slightly.
3. 1.3 Drive in halfshaft-flange sealing ring as far as it will go using the relevant pressure piece
  1. 1.3.1 > 9880 - Pressure piece-1- must be used for the right side.
  2. 1.3.2 > 9880/1 - Pressure piece-2- must be used for the left side.