Installing Casing (Lower Part)
WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order. Pay particular attention to the following:
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Casing (lower part)
- 1.1 Tighten screws on lower part of casing -2-
.
> Tightening - torque 1.5 Nm (1 ftlb.)