LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan T >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (38 Automatic Transmission Gears Control 3.0L -- 95B - MACAN (95B)) >> WM, 387719 Removing And Installing Control Mechanism For Transmission >> Subsequent Work >> Notes

Subsequent Work: Notes

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install ATF pan.

    > 375519 - REMOVING AND INSTALLING ATF PAN

  2. Fill in ATF.

    > 370235 - CHECKING AND TOPPING UP ATF

  3. Connect the battery.

    > 270619 - REMOVING AND INSTALLING VEHICLE ELECTRICAL SYSTEM BATTERY

  4. Calibration after removing and installing the control mechanism: 

    Calibrate control mechanism for transmission using the PIWIS Tester. 

    1. 4.1  Overview -> PDK -> Maintenance/repairs -> Calibration after removing and installing  mechatronics -> F12
    2. 4.2  Follow the instructions on the PIWIS Tester  -> F12.
    3. 4.3  Start the calibration process by pressing F8.
    4. 4.4  Erase fault memory.
scientia non olet · About LEMON Manuals