Removing Sealing Ring For Front Output Shaft

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information

When the transmission is disassembled, the sealing ring on the transmission side can be removed using a screwdriver.

Information

Risk of damage to the bearing cage of the ball bearing behind the sealing ring. Do not press drift punch and tapping screw in too far.

Remove outer sealing ring for front output shaft.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Sealing ring with puller set
1. 1.1 Make a small hole at a non-rubberised area of the outer sealing ring using a drift punch.
2. 1.2 Screw in a tapping screw with a large head.
3. 1.3 Using the > VAS 6965 - puller set-1 - , remove outer sealing ring for front output shaft.
  Information
  - Risk of damage to the bearing cage of the ball bearing behind the sealing ring. Do not press drift punch and tapping screw in too far.
Remove inner sealing ring for front output shaft.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Sealing ring with puller set
1. 2.1 Make a small hole at a non-rubberised area of the inner sealing ring using a drift punch.
2. 2.2 Screw in a tapping screw with a large head.
3. 2.3 Using the > VAS 6965 - puller set-1 - , remove inner sealing ring for front output shaft.