Installing Sealing Ring For Front Output Shaft

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Clip together new sealing rings -1 and 2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Outer and inner sealing ring
1. 1.1 Spiral spring -A - of the outer sealing ring -1- must be pointing towards the PDK transmission.
2. 1.2 Spiral spring -B - of the inner sealing ring -2- must be pointing towards the transmission.
3. 1.3 Clip together outer and inner sealing ring -1 and 2- .
  Information
  - T40260 - Press-in tool can be extended using > VW415A - Tube .
Install new sealing rings using the > T40260 - press-in tool . > Press-in tool

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Press-in tool