Technical Values
WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance1 | Tolerance2 |
|---|---|---|---|---|---|
| Screw on sensor module | Tightening torque | 8 Nm (6 ftlb.) | |||
| Screw securing centre transmission housing to front transmission housing | Continue to tightenin diagonally opposite sequence | Final tightening | + 120° | ||
| Screw securing side shaft to all-wheel output shaft | M14 x 1.5/replace | Initial tightening | 100 Nm (74 ftlb.) | ||
| Screw securing side shaft to all-wheel output shaft | Final tightening | + 120° | |||
| Screw securing centre transmission housing to front transmission housing | Tighten in diagonally opposite sequence/replace | Initial tightening | 8 Nm (6 ftlb.) | ||
| Screw securing transmission housing cover to centre transmission housing | M8 x 43/replace | Initial tightening torque | 20 Nm (15 ftlb.) | ||
| Screw securing transmission housing cover to centre transmission housing | M8 x 55/replace | Initial tightening torque | 15 Nm (11 ftlb.) | ||
| Screw securing transmission housing cover to centre transmission housing | Final tightening | + 90° | |||
| Screw securing lid to final drive | Final tightening | + 90° |