LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan T >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (38 Automatic Transmission Gears Control 3.0L -- 95B - MACAN (95B)) >> WM, 381819 Removing And Installing Wire Harness >> Removing Wire Harness

Removing Wire Harness

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unscrew screws securing wire harness -1-  .
    G15152862Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Upper screws securing wire harness

  2. Remove wire harness -1-  .
    G15152863Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Electrical plug connections for wire harness

    1. 2.1  Remove screw -2-  .
    2. 2.2  Pull locking mechanism -3-  on the electrical plug connections -4-  in -direction of arrow A-  to release, and disconnect the electrical plug connections by pulling -4-  in -direction of arrow B-  .
    3. 2.3  Remove wire harness -1-  from double clutch transmission.
scientia non olet · About LEMON Manuals