Installing Wire Harness

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Installing wire harness -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Electrical plug connections for wire harness
1. 1.1 Move wire harness -1- into installation position.
2. 1.2 Connect electrical plug connections by moving them -2- in -direction of arrow B- and push locking mechanism -3- in -direction of arrow A- to lock electrical plug connections -2- .
3. 1.3 Tighten screw -4- .
  > Tightening - torque 8 Nm (6 ftlb.)
Tighten the screws -1- .
> Tightening - torque 8 Nm (6 ftlb.)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Upper screws securing wire harness