Removing Drive Shaft Bearing

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Remove circlip -1- from the double clutch cover.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Circlip
1. 1.1 Replace circlip.
  CAUTION:
  Mechanical, hydraulic or pneumatic press
  - Risk of squashing
    → Read specific safety information for the press.
    
    → Check that the press is working perfectly before use, particularly the safety components.
Remove bearing from the double clutch cover.
1. 2.1 Press out bearing using > VW415A - tube-1- .
2. 2.2 Replace bearing.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Tubular piece
Remove thrust washer

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Thrust washer
1. 3.1 Replace thrust washer.