LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan T >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (51 - Body Center, Roof, Frame) >> WM, 519419 Removing And Installing Cover For Rear Underbody >> Installing Cover For Rear Underbody

Installing Cover For Rear Underbody

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tighten nuts to > Tightening torque 2.5 (1.75 ftlb.) Nm  .

    Tighten screws to > Tightening torque 2 (1.5 ftlb.) Nm  .

scientia non olet · About LEMON Manuals