Removing side cover for front underbody

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information

The number of fastening screws fixing clips, plug connections, holders and trim panels can vary depending on equipment.
The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant.
Some steps must be carried out automatically.
Some of the repair illustrations show only one side of the vehicle.

Open locking mechanism -1- and pull hose for headlight ventilation -2- out of the side cover on the front underbody -3- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Hose for headlight ventilation
Unscrew screws -1 and 2- and remove side cover for front underbody -3- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Side cover for front underbody