LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan T >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (51 - Body Center, Roof, Frame) >> WM, 519219 Removing And Installing Cover For Front Underbody >> Installing Cover For Front Underbody

Installing Cover For Front Underbody

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALLATION IS PERFORMED IN REVERSE ORDER. PAY PARTICULAR ATTENTION TO THE FOLLOWING:

    TIGHTEN SCREWS ON SIDE COVER FOR FRONT UNDERBODY TO > TIGHTENING TORQUE 2.5 (1.75 FTLB.) NM  .

    TIGHTEN SCREWS ON SIDE COVER FOR FRONT UNDERBODY TO > TIGHTENING TORQUE 2 (1.5 FTLB.) NM  .

    TIGHTEN SCREWS ON COVER FOR FRONT UNDERBODY TO > TIGHTENING TORQUE 2.5 (1.75 FTLB.) NM  .

scientia non olet · About LEMON Manuals