Cut variants
WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
Cuts can be made in the defined a eat on the outer B-pillar due to the parts dimensions. The purpose of the different cuts is to keep the repair area as small as possible in the event of damage.
The diagram should help you to determine the correct position of cuts.
Cut variants
| E-F-H | Cuts for replacing B-pillar reinforcement. |
| > 514255 REPLACING B-PILLAR REINFORCEMENT | |
| E-F-G | Cuts for replacing B-pillar |