LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan T >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (51 - Body Center, Roof, Frame) >> WM, 510955 Replacing Rear Cross Member >> Removing Rear Cross Member >> Removing upper part of rear cross member

Removing upper part of rear cross member

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Loosen connection points on one side only. Do not damage the sheet-metal panel underneath.

  1. Drill out spotwelds using > VAS 882 001 - spot-weld breaker  .
    G14361374Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Upper part of rear cross member

  2. Heat the marked bonding areas using > V.A.G 1416 - hot-air blower  .
    G14361376Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding areas

  3. Remove upper part of rear cross member.
scientia non olet · About LEMON Manuals