LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan T >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (51 - Body Center, Roof, Frame) >> WM, 510955 Replacing Rear Cross Member >> Preparing Rear Cross Member For Installation

Preparing Rear Cross Member For Installation

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit in rear cross member.
  2. Prepare rear cross member for bonding and welding.

    > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

    G14361380Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Rear cross member

    Green Resistance spot-welding
    Blue Bonding
    Orange Bonding + resistance spot-welding
scientia non olet · About LEMON Manuals