Preparing Connection Areas Of Body For Installing Roof
WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
Do not apply zinc powder paint to the bonding areas.
- Clean welding and bonding areas.
- Prepare connection areas for bonding and welding.
- 2.1
Prepare connection flanges in areas -A-
for resistance spot-welding and bonding.
> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00
- 2.2
Prepare connection flanges in areas -B-
for bonding with structural adhesive.
> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH. 071.781.00
- 2.3
Prepare window adhesive bonding surfaces -C-
for bonding with window adhesive.
> *** 6X00IN22 Working with Porsche 2-component window adhesive
Connection areas
- 2.1
Prepare connection flanges in areas -A-
for resistance spot-welding and bonding.