Installing Roof

Information 

• Have this work carried out by an assistant whilst at the same time starting with the welding work. 

1. Apply structural adhesive and window adhesive.
   1. 1.1  Apply structural adhesive evenly in areas -LHD vehicle-  .

      > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

   2. 1.2  Apply window adhesive in the marked areas -Item C-  .

      > *** 6X00IN22 Working with Porsche 2-component window adhesive

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Adhesive

2. Fit roof on rear roof frame with the help of two people -arrow A-  and swivel it in towards the front -arrow B- 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Roof

3. Clean roof surface in the side panel area.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Roof

   1. 3.1  Remove most of the excess adhesive using a plastic spatula or cloth.
   2. 3.2  Carefully clean visible surfaces with a cloth. If necessary, wet cloths with isopropanol, for example.

      Avoid getting solvent into the adhesive at all costs! 

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Roof

4. Resistance spot-weld the front of he roof.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Roof

5. Resistance spot-weld the rear of the roof.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Roof