Removing Oil Cooler

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information

Risk of contaminating the lubricating system

Open parts of the cylinder head must be covered.

Release and disconnect line connection for positive crankcase ventilation -1- and move it aside.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Positive crankcase ventilation line

Information

Risk of contaminating the oil cooler
- Open parts of the oil cooler must be covered.
Remove oil cooler -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Oil cooler
1. 2.1 Unscrew screws on oil cooler -2- .
2. 2.2 Loosen oil cooler -1- and remove it.
3. 2.3 Remove residual sealant fro m the oil cooler -1- and cylinder block using a rotating plastic brush.
Replace seals -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Oil cooler seal