Removing Control Valve

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information

The pictures and graphics shown may differ from the original depending on engine variants, additional equipment and/or country specifications.

However, the technical accuracy of the specifications is guaranteed.

Disconnect coolant line -1- .
1. 1.1 Loosen screw -2- .
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Coolant line
Remove control valve -1- .
1. 2.1 Pull off vacuum hose -2- .
2. 2.2 Unscrew screws -3- .
3. 2.3 Pull coolant line out of the control valve -1- and remove control valve -1- .
4. 2.4 Catch emerging coolant.
5. 2.5 Replace O-ring -4- and seal -5- .
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Control valve