Removing Additional Coolant Pump

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect coolant line.

1.1 Loosen nut -3- .
Information

The following pliers are suitable for loosening and tightening the spring band clamps:
- VAS 6856 - Spring band clamp pliers
- VAS 6889 - Spring band clamp pliers
- VAS 6890 - Spring band clamp pliers
- VAS 6891 - Spring band clamp pliers
- VAS 6930 - Spring band clamp pliers
1.2 Loosen clamp -2- .
Use a special tool if necessary.

1.3 Move coolant line aside.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Upper coolant line

Remove additional coolant pump holder -1- .
1. 2.1 Unscrew screws on additional coolant pump -2- .
2. 2.2 Unscrew double screw for additional coolant pump holder -3- .
3. 2.3 Remove additional coolant pump holder -1- .
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Additional coolant pump (right cylinder bank)
Remove additional coolant pump -4- .
1. 3.1 Release and disconnect electric plug connection -1- .
  Information
  
  The following pliers are suitable for loosening and tightening the spring band clamps:
  - VAS 6856 - Spring band clamp pliers
  - VAS 6889 - Spring band clamp pliers
  - VAS 6890 - Spring band clamp pliers
  - VAS 6891 - Spring band clamp pliers
  - VAS 6930 - Spring band clamp pliers
2. 3.2 Open clamp -2- .
  Use a special tool if necessary.
3. 3.3 Unscrew screw -3- using > T10405 - socket T30 .
4. 3.4 Remove additional coolant pump -4- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Additional coolant pump