LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan T >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (19 Engine - Cooling 3.0L -- 95B - MACAN (95B)) >> WM, 194019 Removing And Installing Coolant Reservoir (V6 Turbo) >> Removing Coolant Reservoir

Removing Coolant Reservoir

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove air inlet housing cover -1-  .
    G15149878Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Air inlet housing cover

    1. 1.1  Unscrew nuts -2-  .
    2. 1.2  Remove air inlet housing cover -1-  .
  2. Disconnect electric line -1-  from coolant reservoir.
    G15149879Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Electric line at coolant reservoir

    1. 2.1  Release and disconnect electric plug connection -2-  .
    2. 2.2  Unclip clips -3-  .
  3. Remove coolant reservoir -1-  .
    G15149880Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Coolant reservoir

    1. 3.1  Release and disconnect electric plug connection -2-  .
    2. 3.2  Unclip clip -3-  .
    3. 3.3  Release and disconnect quick connector -4-  .
    4. 3.4  Unclip vent line -5-  from coolant reservoir -Arrow-  .
    5. 3.5  Loosen spring band clamp -6-  using > VAS 6890 - spring band clamp pliers  and pull off coolant hose -7-  .
      1. 3.5.1  Soak up any emerging coolant using suitable aids.
      2. 3.5.2  Close off connection openings using suitable stoppers.
    6. 3.6  Lift up retaining clip -8-  and pull off coolant hose -9-  .
      1. 3.6.1  Soak up any emerging coolant using suitable aids.
      2. 3.6.2  Close off connection openings using suitable stoppers.
    7. 3.7  Unscrew screw -10-  .
    8. 3.8  Pull coolant reservoir -1-  up out of the holders -11-  .
scientia non olet · About LEMON Manuals