Installing Cooling-Air Flaps

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Installation is performed in reverse order. Pay particular attention to the following:

1.1 Tighten screws -2- .

Tightening torque 2.5 Nm (1.75 ftlb.)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for lock carrier

1.2 Tighten screws -1- .

Tightening torque 9.7 Nm (7.2 ftlb.)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Cooling-air flaps

1.3 Only for vehicles with distance measuring sensor:

Tighten screws -2- .

Tightening torque 2.5 Nm (1.75 ftlb.)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Distance measuring sensor holder