Removing Motor For Cooling-Air Flaps
WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
The pictures shown in this document may differ from the original.
- Remove driver for cooling-air flaps -1-
in. -Arrow direction-
Driver for cooling-air flaps
- Loosen motor for cooling-air fl
aps. -1-
Motor for cooling-air flaps (similar illustration)
- 2.1 Unscrew screw. -2-
- Remove motor for cooling-air flaps. -1-
Motor for cooling-air flaps (similar illustration)
- 3.1 Lift motor for cooling-air flaps -1- up and remove it.