Installing Motor For Cooling-Air Flaps
WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order. Pay particular attention to the following:
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Motor for cooling-air flaps
- 1.1
Tighten screw for engine cooling-air flaps -2-
.
- Tightening torque 2.5 Nm (1.75 ftlb.)