Subsequent Work

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Install camshaft controller actuator on bank 1 and bank 2.
- WM, 153919 - REMOVING AND INSTALLING CAMSHAFT CONTROLLER ACTUATOR (V6 TURBO)
Secure oxygen sensor downstream of catalytic converter.
- WM, 247319 REMOVING AND INSTALLING OXYGEN SENSOR DOWNSTREAM OF CATALYTIC CONVERTER (V6 MONOTURBO)
Install heat shield.
- WM, 261219 - REMOVING AND INSTALLING HEAT SHIELD (V6 TURBO)
Install cross panel.
- > WM, 508119 REMOVING AND INSTALLING CROSS PANEL (DISASSEMBLING PLENUM PANEL)
Install front strut.
- WM, 408619 REMOVE AND INSTALL FRONT STRUT
Install engine cover (design cover).
- WM, 108319 REMOVING AND INSTALLING ENGINE COVER (DESIGN COVER) (V6 TURBO)
Install cover for front underbody.
- WM, 519219 REMOVING AND INSTALLING COVER FOR FRONT UNDERBODY