Preliminary Work

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Remove cover for front underbody.
- WM, 519219 REMOVING AND INSTALLING COVER FOR FRONT UNDERBODY
Remove engine cover (design cover).
- WM, 108319 REMOVING AND INSTALLING ENGINE COVER (DESIGN COVER) (V6 TURBO)
Remove front strut.
- WM, 408619 REMOVE AND INSTALL FRONT STRUT
Remove cross panel.
- WM, 508119 REMOVING AND INSTALLING CROSS PANEL (DISASSEMBLING PLENUM PANEL)
Remove heat shield.
- WM, 261219 - REMOVING AND INSTALLING HEAT SHIELD (V6 TURBO)
Loosen oxygen sensor downstream of catalytic converter.
- WM, 247319 REMOVING AND INSTALLING OXYGEN SENSOR DOWNSTREAM OF CATALYTIC CONVERTER (V6 MONOTURBO)
Remove camshaft controller actuator on bank 1 and bank 2.
- WM, 153919 - REMOVING AND INSTALLING CAMSHAFT CONTROLLER ACTUATOR (V6 TURBO)