Removing Tailpipe Cover (V6 Monoturbo)

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Hot components

Risk of burns

→ Let hot components cool down.
→ Wear personal protective gear.

Information

The procedure for removing and ins tailing is described for one side as an example. The procedure for the other side is almost identical.

Remove tailpipe covers -1- .
1. 1.1 Marking installation positions.
2. 1.2 Unscrew screws -2- .
3. 1.3 Pull tailpipe covers -1- off the rear silencer.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Tailpipe covers (V6 Monoturbo)