Installing Hall-Sender Rotor

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information

Check the new hall-sender rotor before installing it.
The hall-sender rotor must not come into contact with a magnet.

If the hall-sender rotor comes close to a magnet, replace it.

Check condition of hall-sender rotor -1- using > T10473 - test card-2- .

1.1 > T10473 - Test card-2- must be held over the hall-sender rotor -1- Then turn it.
1.2 An undamaged hall-sender rotor -1- will have clearly visible continuous stripes -Arrows- .
Result: Hall-sender rotor -1- OK!

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Undamaged hall-sender rotor

Check "TDC marking" -arrow- using > T10473 - test card-2- .

2.1 > T10473 - Test card-2- must be held over the hall-sender rotor -1- Then turn it.
2.2 An undamaged hall-sender rotor -1- will have a clearly visible "TDC marking" -arrow- .
Result: Hall-sender rotor -1- OK!

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Undamaged "TDC marking"

If the hall-sender rotor is damaged:
Replace hall-sender rotor.
1. 3.1 If the hall-sender rotor -1- is damaged, the stripes -arrow- will not be visible.
  Result: Hall-sender rotor -1- not - OK - replace it!

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Damaged hall-sender rotor