Removing Ignition Starter Switch

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Remove trim panel -1- on main headlight switch and ignition starter switch.
1. 1.1 Release and disconnect electric plug connection -2- for ignition starter switch light.
2. 1.2 Unclip locking lugs -arrows a- and remove trim panel.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Trim panel on main headlight switch and ignition starter switch
Remove ignition starter switch.
1. 2.1 Loosen and unscrew union nut -1- using > 9800 - wrench .
2. 2.2 Remove ignition starter switches from trim panel under dashboard at the left.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Union nut (shown on the 991)
Release electric plug connection -arrow a- and disconnect it -Arrow- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Electric plug connection