Installing Intake-Air Distributor

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Install intake-air distributor -11- .

Fig 1: Intake-Air Distributor Screws Tightening Sequence
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Intake-air distributor
1. 1.1 Check intake-air distributor seal for damage and replace it if necessary.
2. 1.2 Position intake-air distributor -11- .
3. 1.3 Tighten screws in the sequence -1 to 10- .
  - Initial tightening 8 Nm (6 ftlb.)
  - Final tightening + 45°
Install line bracket -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Line bracket
1. 2.1 Clip in line bracket -1- .
2. 2.2 Connect and lock electric plug connections -2- .
3. 2.3 Clip in clip -3- .
4. 2.4 Clip electric wiring harness -4- into clips -5- .