Removing Rear Panel
WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Release expansion rivets -1-
and remove them.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Expansion rivets
- For plastic rear panels:
Unclip and remove rear panel -1-
at the locking lugs -2-
.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Rear panel - plastic
- For metal rear panels:
Remove rear panel.
- 3.1
Bend up sheetmetal brackets at the centre -2-
of the rear panel -1-
.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Sheetmetal brackets at the centre
- 3.2
Bend up sheetmetal brackets at the sides -2-
of the rear panel -1-
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Sheetmetal brackets at the sides
- 3.3
Remove rear panel.