Removing Front Bumper

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information

The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment.

The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant.
Some steps must be carried out automatically.
Some of the repair illustrations show only one side of the vehicle.

Pull off tabs -1- and remove impact absorber -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Tabs
Unclip ventilation guides -3- and fold them inwards.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Ventilation guides
Unscrew screws -1- , prise front bumper -3- off the bracket -2- using a mounting lever and remove it by pulling it forward.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Front bumper