15 Engine - Cylinder Head, Valve Drive 2.0L - 95B - MACAN (95B)

See WM, 158219 - REMOVING AND INSTALLING CYLINDER HEAD COVER (R4) - INSTALLATION POSITION

See WM, 155519 - REMOVING AND INSTALLING HYDRAULIC VALVE FOR VALVE LIFT SWITCHOVER (R4) - INSTALLATION POSITION

See WM, 157019 - REMOVING AND INSTALLING CYLINDER HEAD (R4) - INSTALLATION POSITION

See WM, 155920 - REMOVING AND INSTALLING VALVE LIFTERS (R4) - INSTALLATION POSITION

See WM, 154719 - REMOVING AND INSTALLING GUIDE AND TENSIONING RAILS (R4) - INSTALLATION POSITION

See WM, 153319 - REMOVING AND INSTALLING UPPER CHAIN HOUSING COVER (R4) - INSTALLATION POSITION

See WM, 153319 - REMOVING AND INSTALLING LOWER CHAIN HOUSING COVER (R4) - INSTALLATION POSITION

See WM, 153519 - REMOVING AND INSTALLING TIMING CHAIN (R4) - INSTALLATION POSITION

See WM, 156356 - REPLACING VALVE-STEM SEALS (R4) - INSTALLATION POSITION

See WM, 158419 - REMOVING AND INSTALLING CAMSHAFT ACTUATOR (R4) - INSTALLATION POSITION

See WM, 156120 - REMOVING AND INSTALLING VALVES (R4) - INSTALLATION POSITION

See WM, 153919 - REMOVING AND INSTALLING CAMSHAFT CONTROLLER ACTUATOR (R4) - INSTALLATION POSITION

See WM, 153619 - REMOVING AND INSTALLING CHAIN TENSIONER (R4) - INSTALLATION POSITION

See WM, 150506 - CHECKING AND SETTING TIMING OF CAMSHAFTS (R4) - INSTALLATION POSITION